Paving in Thornaby
Paving across Thornaby's TS17 postcodes: front drives at £60 to £100 per square metre through Mandale, Village and Stainsby Hill, back yards and paths behind the older terraces, and repairs from £150 where estate drives have settled on clay.
Estate housing with everyday frontages
Most Thornaby paving is honest domestic work on 25 to 40 square metre frontages: Mandale, Stainsby Hill, Village and Harewood are all post-war estate housing where the front garden was designed for a hedge and now parks a car. Converting to a proper drive means a full dig rather than a slab poured over the lawn, restraint on every open side, and a fall that puts water somewhere sensible. At those sizes £60 to £100 per square metre puts most drives between £1,500 and £4,000.
Clay ground and settlement
The heavy clay that runs under this side of the river punishes shallow work. The tell-tale in Thornaby is the wheel-track dip: two parallel depressions where the car sits, caused by a sub-base laid too thin for repeated loading. Patching the surface changes nothing, because the failure is 200mm down. Lifting, rebuilding the base and relaying from £150 is the real fix and reuses the existing blocks.
Older streets and back access
The terraces around Thornaby Village and the streets off Mandale Road follow the pattern of the older parts of Teesside: rear yards reached from a lane, materials carried in, and small paved areas where a good flag surface at £50 to £80 per square metre does more for the space than anything elaborate. Check the figures against the cost guide before signing anything.